Need Bees Removed?
International
Beekeeping Forums
October 22, 2014, 08:45:42 AM *
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
News: Beemaster's official FACEBOOK page
 
   Home   Help Search Calendar bee removal Login Register Chat  

Pages: [1]   Go Down
  Print  
Author Topic: double screen filter  (Read 714 times)
leechmann
House Bee
**
Offline Offline

Gender: Male
Posts: 144

Location: Park Rapids, MN.


« on: October 03, 2013, 12:46:14 AM »

I am filtering my honey with the double screen filter. I am having trouble with the fine screen getting clogged up. Wondering if there are any tricks that any of you use for cleaning the fine screen out. Has any of you, ever put the screen in the oven to melt the crud and wax out of the fine mesh?

Your help is appreciated

Logged
amun-ra
House Bee
**
Offline Offline

Gender: Male
Posts: 77

Location: Townsville north Queensland


« Reply #1 on: October 03, 2013, 04:58:15 AM »

I have solar hot water at 70c so I just rinse under the tap works fine
you could also put your honey buckets in the sun for a few hours to warm it up.Some honey just will not go through the fine filter depends on the type of flow they're on.
Logged

Every day the sun shines and gravity sucks= free energy
sawdstmakr
Galactic Bee
******
Offline Offline

Gender: Male
Posts: 3173


Location: Jacksonville FL


« Reply #2 on: October 03, 2013, 05:23:07 AM »

Sounds like you are asking how to clean out the netting after you have extracted the honey. I just take it outside and reverse it and use a hose to blast the particles out. This works great until you put hot wax in the bag. I put a bucket of cappings in my bucket heater and raised the temp to get the honey to separate out a little bit better. It worked out pretty good but when I put it in the filter bucket some of the wax ended up sticking to the filter permanently and little pieces would not wash out with the hose. I have used this same mesh bag a dozen times and it always cleaned up real well with the hose until I put hot wax in it. The wax was not liquid but just soft. Pressure probably pushed the pieces into the mesh.
Jim
Logged

"If you don't read the newspaper you are uninformed.  If you do read the newspaper you are misinformed."--Mark Twain
Anybrew
House Bee
**
Offline Offline

Gender: Male
Posts: 223


Location: Dubbo Australia


« Reply #3 on: October 04, 2013, 02:49:41 AM »

Hey Leechman, I was having the same trouble filtering until I remembered that if you let the Honey sit for about three days most of the junk floats to the top. I then skim it with a big spoon and put the junk(wax,arms and legs,dead bee's etc) to the side to later recover the wax from.

It works well. I then warm the honey in an old chest freezer with a light globe for about 6 hours and then filter it.

Cheers
Steve
Logged
sterling
Field Bee
***
Offline Offline

Gender: Male
Posts: 991

Location: mt juliet tn


« Reply #4 on: October 04, 2013, 10:41:04 AM »

The easiest way to clean a filter is put it where the bees can get to it and they will leave only dry wax particles. as for the filter I just use the coarse when I extract then let it set a while and pour through the finer filter but like has already been said the honey needs to be warm 80 degrees or so.
Logged
ChrisT
House Bee
**
Offline Offline

Gender: Male
Posts: 76

Location: Atlanta, GA


« Reply #5 on: October 06, 2013, 02:28:57 AM »

I have never had "crud and wax" get stuck in my filters..
Turn it inside out and shake the stuff out after its dried.

I would guess youre talking about some propolis.. Now THAT has certainly can goo up a filter since heating it up just makes it stick to the mesh more. But still ive never had wax or crud stick to my [nylon mesh] filters.

After im done straining, I get as much of it out of the filter by hand as i can and then I wash the net (with the crap inside) to get the little bit of honey left behind off and then let it dry, turn it inside out and shake (outside of course).

Leaves only a couple spots behind sometimes.

Chris
Logged
L Daxon
Field Bee
***
Offline Offline

Gender: Female
Posts: 669


Location: Oklahoma City


« Reply #6 on: October 07, 2013, 09:47:24 PM »

I just had a lot of fine wax and propolis stick to the fine screen on my double ss filter.  First I scraped the bottom of the filter with a fork until most of the honey can get through.  I then took it to the back porch and let the bees clean it up some more.  They will actually dislodge a lot of the finer particles.  Whatever is still stuck to the filter, I rinse off with water heated to at least 150 degrees (wax melts at 144 degrees) or even boiling water.  It melts away any remaining wax/propolis, etc.
Logged

linda d
Joe D
Super Bee
*****
Offline Offline

Gender: Male
Posts: 1997

Location: Ovett, Ms


« Reply #7 on: October 08, 2013, 01:39:05 AM »

I do mine kinda like Anybrew,  after extracting into a five gal bucket or drum, put the lid on it let it sit for a few days.  Then I skim wax and other things off with a big spoon and collander.  Then I have a small mesh SS piece of material like expanded metal that is a box.  I pour the honey into it, it is sitting on top an 5 gal bucket with paint strainer in it.  This bucket has several 1/2" holes in the bottom and it is sitting on top of another bucket.  The honey pours right through.  Good luck



Joe
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Beemaster's Beekeeping Ring
Previous | Home | Join | Random | Next
Powered by MySQL Powered by PHP Powered by SMF 1.1.20 | SMF © 2013, Simple Machines | Sitemap Valid XHTML 1.0! Valid CSS!
Page created in 0.89 seconds with 22 queries.

Google visited last this page Today at 12:10:19 AM
anything