Need Bees Removed?
International
Beekeeping Forums
December 18, 2014, 07:12:15 AM *
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
News: Beemaster's official FACEBOOK page
 
   Home   Help Search Calendar bee removal Login Register Chat  

Pages: [1]   Go Down
  Print  
Author Topic: Help with frames in deep super  (Read 1566 times)
Palouse
House Bee
**
Offline Offline

Posts: 71

Location: Pullman, WA


« on: March 30, 2013, 08:25:45 PM »

I'm new at this and have assembled my hive bodies, and I got to my frames today.  I put ten frames in my super, and there's what appears to me to be an inordinate amount of space for the ten frames in the super.  I can almost, but not quite, fit eleven frames in the super.  Internal dimensions of the hive body are 18-1/2" x 14-3/4".  The top rails or bars of the frames 1-1/16" deep.  A photo is below to better illustrate my problem, if it is one.  Is this normal? And if so, how do you properly space these the frames in the super?  Nowhere in the book I have is this mentioned, and I'm concerned that the bees I pick up in two weeks won't have a proper home.

Many thanks for any response.

Looks like I can't post a photo, but the space left in the box when I have all the frames pushed to one side is 1-5/32" from the edge of the box to the top bar and 1-1/32" from the edge of the box to the stile/side piece of the frame.
Logged
capt44
Field Bee
***
Offline Offline

Gender: Male
Posts: 531


Location: Central Arkansas


WWW
« Reply #1 on: March 30, 2013, 09:40:29 PM »

The wood used to build the boxes should be 3/4 inch thick.
Some wood is planed to 13/16 inch something to think about if using a finger joint jig.
The dimensions should be 19 7/8 inches long and 16 1/4  inches wide (external)
You should have some space to move the frames around.
The Deep Box should be 9 5/8 inches deep.
The frame rest should be 3/8 inch X 5/8 inch.


Logged

Richard Vardaman (capt44)
AllenF
Galactic Bee
******
Offline Offline

Gender: Male
Posts: 8186

Location: Hiram, Georgia


« Reply #2 on: March 30, 2013, 09:43:06 PM »

You have to space the frames out evenly in the box.   If the frames were tight in the box, you would not be able to get the frames out after the bees had glued everything in. 
Logged
Palouse
House Bee
**
Offline Offline

Posts: 71

Location: Pullman, WA


« Reply #3 on: March 31, 2013, 01:03:43 AM »

The wood used to build the boxes should be 3/4 inch thick.
Some wood is planed to 13/16 inch something to think about if using a finger joint jig.
The dimensions should be 19 7/8 inches long and 16 1/4  inches wide (external)
You should have some space to move the frames around.
The Deep Box should be 9 5/8 inches deep.
The frame rest should be 3/8 inch X 5/8 inch.

Thanks.  My boxes match the dimensions you list.  The stock is 3/4" thick.


You have to space the frames out evenly in the box.   If the frames were tight in the box, you would not be able to get the frames out after the bees had glued everything in.  

I figured I'd need some room, but I was surprised at how much room I have. I searched quite a bit before posting here, and I kept looking after posting.  I finally found a post that stated that you should push the frames together and center them in the box.
Logged
rbinhood
House Bee
**
Offline Offline

Gender: Male
Posts: 278

Location: East Central Alabama


« Reply #4 on: March 31, 2013, 02:23:37 PM »

Push your frames tight together in the center of your box and have equal amounts of space on each side.
Logged

Only God can make these two things.....Blood and Honey!
fshrgy99
House Bee
**
Offline Offline

Posts: 203


Location: Kitchener Ontario Canada


« Reply #5 on: March 31, 2013, 09:02:03 PM »

I was right where you're at about a year ago. Sounds like your O.K. If you follow in my footsteps please share your thoughts the first time you lift a full honey super! Smiley
Logged
Michael Bush
Universal Bee
*******
Offline Offline

Gender: Male
Posts: 13961


Location: Nehawka, NE


WWW
« Reply #6 on: April 01, 2013, 10:27:28 AM »

It is normal.  Push the frames together in the center.
Logged

Michael Bush
My website:  bushfarms.com/bees.htm
My book:  ThePracticalBeekeeper.com
-------------------
"Everything works if you let it."--Rick Nielsen
buzzbee
Ken
Administrator
Galactic Bee
*******
Offline Offline

Gender: Male
Posts: 5526


Location: North Central PA


WWW
« Reply #7 on: April 01, 2013, 06:45:06 PM »

Palouse,
If you would like pics posted until you are able, forward them to:
photos@beemaster.com
And mention the post you would like to attach them. We will be glad to help  you. Smiley
Logged
Palouse
House Bee
**
Offline Offline

Posts: 71

Location: Pullman, WA


« Reply #8 on: April 25, 2013, 01:57:29 PM »

Thanks for everyone's help. Despite doing a lot of reading, the experience has been more humbling than I thought it would be. Fun, but humbling.
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Beemaster's Beekeeping Ring
Previous | Home | Join | Random | Next
Powered by MySQL Powered by PHP Powered by SMF 1.1.20 | SMF © 2013, Simple Machines | Sitemap Valid XHTML 1.0! Valid CSS!
Page created in 0.125 seconds with 22 queries.

Google visited last this page December 17, 2014, 08:16:01 AM
anything