Need Bees Removed?
International
Beekeeping Forums
November 26, 2014, 02:03:34 PM *
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
News: Beemaster's official FACEBOOK page
 
   Home   Help Search Calendar bee removal Login Register Chat  

Pages: [1]   Go Down
  Print  
Author Topic: Hive management  (Read 824 times)
tomofreno
New Bee
*
Offline Offline

Posts: 26

Location: NV


« on: March 30, 2013, 10:37:21 AM »

I finished reading Les Crowder's book on top bar hives recently.  Very nice to have some guidance on management.  It has been much warmer than normal here for about a month now, and the bees have been active so I thought I would do some hive management to prepare for the flow which will start shortly.  Per Les, I moved darker empty combs from the hive front to the back, behind the brood nest, and moved honey comb from there to the front.  I swapped about 4 or 5 of each.  I also took a couple partial combs and placed them between straight empty combs taken from the front so the bees would draw out the comb straight as he said.  That was pretty straight-forward I think, but then it gets more murky to me...

There were 20 TB's with comb, two of which were partial.  The 8 or so combs in the front of the hive were nice and straight, so seeing that last year I got complacent and stopped checking.  The last 3 or 4 were cross-combed, one of these was a partial comb.  I did not want to disturb the brood nest so I did not check the 6 or 7 central combs.  It seems that cutting and realigning empty new comb would be straight-forward, but it is more difficult for comb with honey.  Nonetheless, I decided I had to trim off the crooked part (about 3" - 4" at one end) and place straight comb next to these so the bees would hopefully repair the ones I cut and make them straight.  I used a large sharp knife to cut off the crooked sections and just laid them against the back wall of the hive for the bees to clean.  Surprisingly to me, I didn't spill much honey in the rest of the hive, so it wasn't too messy except for the back where I laid them.  I then put straight empty comb adjacent to the cut ones.

I did not want to disturb the central area since we will likely get some cold nights yet, so I wanted to leave the cluster area undisturbed.  However, I did not get to any brood comb. The last comb I saw in the back of the undisturbed section was honey comb - I just kept finding more and more honey comb.  I quit after moving the 4 or 5 to the front.  I felt I should leave that central area alone, but I also wonder if they may still feel "honey bound"?  There were bees on the empty comb I put in back so maybe not?  I didn't expect these open comb had any eggs, but did not check closely.  Now I am wondering if they did since there were bees on them.  Could I possibly have screwed up and moved some comb with eggs out of the front of the brood area?  I didn't even think of that until later because it is so early in the year I figured the queen would not be laying.  I stopped removing comb from the front when I came to one that had a small section of capped cells at the top, the rest open.   

Temps have been in the mid 60's day/mid 30's night, and this week are forecast to be upper 60's low 70's day/around 40 at night.

I would greatly appreciate knowing what I did right and what I did wrong.
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Beemaster's Beekeeping Ring
Previous | Home | Join | Random | Next
Powered by MySQL Powered by PHP Powered by SMF 1.1.20 | SMF © 2013, Simple Machines | Sitemap Valid XHTML 1.0! Valid CSS!
Page created in 0.169 seconds with 21 queries.

Google visited last this page November 12, 2014, 04:26:51 AM