Need Bees Removed?
International
Beekeeping Forums
August 22, 2014, 08:54:59 PM *
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
News: ATTENTION ALL NEW MEMBERS
PLEASE READ THIS OR YOUR ACCOUNT MAY BE DELETED - CLICK HERE
 
   Home   Help Search Calendar bee removal Login Register Chat(1)  

Pages: [1]   Go Down
  Print  
Author Topic: Bee Space - Wiggle Room? Warre Bars in TBH?  (Read 2579 times)
Benda
New Bee
*
Offline Offline

Posts: 1

Location: Hopelessly Lost


« on: November 12, 2012, 12:20:34 PM »

Greetings - I am trying to get started with top bar hives.

I am located in the Levant - and so I have no idea whether my native bees are small African or large European or....

So: what is the "wiggle room" for bee space? grin

Instead of trying to guess the width of the top bars - can I just lay bars out Warre-style (say, 25mm bars spaced 36mm) and close the hive with a wooden cover (1cm gap over the bars)? I am going with a top entry anyway to aid summer ventilation.

Will I be able to lift these bars - or will they be glued down by the bees?
Thanks
Ben
Logged
little john
House Bee
**
Offline Offline

Posts: 74

Location: Lincolnshire, England


« Reply #1 on: November 13, 2012, 04:56:17 AM »

I believe the consensus view is that 2 widths of top bar are required: a bar in the 32-38 mm range for brood, and around 6 mm wider for honey, although I do know of at least one successful beek who is running brood at sub-32 mm. Having said that, I've been running with 38mm for both brood and honey without problems.

Until you're sure which widths are suitable for your local bees, thin plywood spacers (the same length and height as your bars) could be inserted between bars in the brood area, and removed if the bees show signs of generating burr comb. A simple way of dealing with the honey/brood spacing issue, and to keep your bars inter-changeable, is to simply insert 6 mm spacers between bars in the honey area.


Logged
Joe D
Super Bee
*****
Offline Offline

Gender: Male
Posts: 1980

Location: Ovett, Ms


« Reply #2 on: November 13, 2012, 10:09:14 AM »

Brenda, I also use the 38 mm width for all TBH bars.  One the first bar I did add a 1/4 in spacer to the front side.  I also made frames for my bars.   As for burr comb and sticking bars to the hive, I have almost none.  There is a very small amount where they glue one bar to the next, nothing like in my langs.  Go luck with bees.




Joe

Logged
little john
House Bee
**
Offline Offline

Posts: 74

Location: Lincolnshire, England


« Reply #3 on: November 15, 2012, 04:15:51 AM »

Nice one Joe.

Here's a simple frame modification I came up with that allows a standard Hoffman frame (British National deep, 35 mm spacing) to be used in a KTBH.  Fits the 'standard' KTBH dimensions as given on the BB site, leaving an 8 mm B/S on either side. Serendipity.
Bottom bars can be removed by simply pulling out a couple of interference-fit panel-pins, if desired.



Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Beemaster's Beekeeping Ring
Previous | Home | Join | Random | Next
Powered by MySQL Powered by PHP Powered by SMF 1.1.19 | SMF © 2013, Simple Machines | Sitemap Valid XHTML 1.0! Valid CSS!
Page created in 1.047 seconds with 22 queries.

Google visited last this page August 20, 2014, 11:05:30 AM