Need Bees Removed?
International
Beekeeping Forums
July 30, 2014, 05:07:42 AM *
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
News: Beemaster's official FACEBOOK page
 
   Home   Help Search Calendar bee removal Login Register Chat  

Pages: 1 2 [All]   Go Down
  Print  
Author Topic: Bees in stall wall, Robo Vac tips needed, any tips or suggestions welcomed!!!!  (Read 5022 times)
Intheswamp
Queen Bee
****
Offline Offline

Posts: 1377

Location: South Central Alabama - Zone 8A


WWW
« on: September 07, 2012, 01:59:40 AM »

My mentor and I will be removing some bees at a closed down dairy farm in a week or so.  It is late in the season and would've loved to have had this back in the early summer but...  The owner doesn't want to kill them but has stated that they have to be gone one way or the other by the 21st so we've got two weeks to get them out.  I went and checked them out today.

The bees are under a large pole shed in the wall of a stall where bulk material was stored.  There are cement walls going up just past waist high and then sheets of plywood screwed to either side of red steel studs.  There are several of these walls making up several "stalls". 

There's maybe 20 sheet metal screws to remove.  We *may* have to stand on a very short step ladder but I doubt it...the bees basically are right there within arms reach.  The bees appear to be very calm bees as I don't think I got seriously buzzed standing right beside them today.  This appears to be a perfect first removal for a newbee like me.  When I first saw them I was somewhat intimidated...there were bees at each end of a 13' stretch of wall with the largest cluster in the middle of that stretch.  As it turned out a short 5' section is empty.  It is awesome standing in the stall as there is no way to miss the constant loud buzzing going on.

The wall is a relatively thin wall...maybe a 4" hollow.  I'm thinking that the comb will be long and narrow.  The owner showed me a place on another stall wall where he had removed a colony last year...the comb residue showed that they were long and narrow.  I'm taking it that this comb will be somewhat difficult to rubberband into a frame in the proper orientation.  Would I be better off to prepare some comb with thread running horizontally on one side to lay the comb on and then tie it in with more thread running horizontally, too?   Would it be ok to lay the brood comb in at 45-degrees (on it's side)?...that way I could put longer pieces in the frames.

When I begin removing the plywood should I expect the comb to be attached to both pieces of plywood?  One side of the wall tends to catch the evening sun and would be a "warmer side"...would this encourage the bees to attach or not attach the comb to that side or do they even pay attention to that? 

As I mentioned Rob is shippng me one of his vacs and I'm anxious to put it to use.  I decided to begin my beekeeping journey with all 8-frame medium equipment and that is what I will be using with the vac.    I really don't know how big this colony is, I think it is fairly large (but I could be fooled).  Anybody want to recommend a number of boxes to go between the top and bottom of the vac?  Presently I'm thinking of one empty medium on the bottom with two more mediums with foundation in them above the empty one.  I think it would be plenty of room but would it be way too much room?

Any suggestions on using the vac and removing these bees are greatly appreciated.  G3 and Rob, thanks for the videos that you posted...those have helped me a lot in understanding the vac.

The property owner told me that he also had a colony in a tree...that's three known colonies on this property.  I'm thinking this is a good area for honey bees...several large lakes on his property along with a small river running through part of it.  I think I'm gonna work on getting permission to put out some swarm traps out around there this spring. Wink

Thanks for your help.  Here are some shots of the area...   Ed



Another view...







Logged

www.beeweather.com 
American blood spilled to protect the freedom and peace of people all over the world.  320,000 USA casualties in WWI, 1,076,000 USA casualties in WWII, 128,000 USA casualties in the Korean War, 211,000 casualties in the Vietnam "conflict", 57,000 USA casualties in "War on Terror".  Benghazi, Libya, 13 USA casualties. These figures don't include 70,000 MIA.  But, the leaders of one political party of the United States of America continue to make the statement..."What difference does it make?".

"We can't expect the American People to jump from Capitalism to Communism, but we can assist their elected leaders in giving them small doses of Socialism, until they awaken one day to find that they have Communism."..."The press is our chief ideological weapon." - Nikita Khrushchev
Intheswamp
Queen Bee
****
Offline Offline

Posts: 1377

Location: South Central Alabama - Zone 8A


WWW
« Reply #1 on: September 07, 2012, 02:06:31 AM »

After looking at the photo with the written notations I figured I'd comment on them.  The bees on the right side were a small group of bees that were working hard fanning.  Pulling back the plywood a little bit down below them and looking into the wall from the end I saw that it was empty to the next metal stud.  The bees in the top center of the wall were clustered pretty closely and on the opposite side of the wall from them there was a double handful of bees.  The bees on the lower left side were clustered but not fanning much, if any...there was a good bit of traffic with bees leaving and arriving at that hole...I think this is the main entrance and the others are ventilation(?) holes or Huh  I also got to wondering if there might be two colonies.  The loudest hum was where red "x" is and the word "Comb ?" is written.   I was happy to see how calm they were.

Ed
« Last Edit: September 07, 2012, 09:08:59 AM by Intheswamp » Logged

www.beeweather.com 
American blood spilled to protect the freedom and peace of people all over the world.  320,000 USA casualties in WWI, 1,076,000 USA casualties in WWII, 128,000 USA casualties in the Korean War, 211,000 casualties in the Vietnam "conflict", 57,000 USA casualties in "War on Terror".  Benghazi, Libya, 13 USA casualties. These figures don't include 70,000 MIA.  But, the leaders of one political party of the United States of America continue to make the statement..."What difference does it make?".

"We can't expect the American People to jump from Capitalism to Communism, but we can assist their elected leaders in giving them small doses of Socialism, until they awaken one day to find that they have Communism."..."The press is our chief ideological weapon." - Nikita Khrushchev
Robo
Technical
Administrator
Galactic Bee
*******
Offline Offline

Gender: Male
Posts: 6391


Location: Scenic Catskill Mountains - NY

Beekeep On!


WWW
« Reply #2 on: September 07, 2012, 02:39:32 PM »

I would expect the comb to be running parallel with the plywood but still attached to both pieces of plywood in spots.   It is always fun trying to take off a whole sheet of plywood at a time.  I would start at one corner and try to get a look inside as you go.   Having a knife on a long stick that you can slide in from the side and cut any connected comb off the plywood as you pull it off is a big help.

As far as how many supers, your current plan of 3 mediums should be sufficient for a normal sized colony.  If you think it is a big one,  I would add another medium.   too much room below the cut-out shim should not be an issue as long as the seams are tight or sealed with duct tape.   Only draw back should be weight.   But a little extra weight is a lot better than not enough room and overheating bees.

If your worried about mounting the comb,  I find frames cut in half with wire stapled to the outside work great.  Just use them like a book around the comb. http://robo.bushkillfarms.com/cut-out-frames/

good luck and remember to NOT use too much suction.   In fact,  stop along the way and look down through the cut out shim to make sure you aren't killing the bees.
« Last Edit: September 07, 2012, 07:44:27 PM by Robo » Logged

"Opportunity is missed by most people because it comes dressed in overalls and looks like work." - Thomas Edison


G3farms
Queen Bee
****
Offline Offline

Gender: Male
Posts: 1485


Location: concord, tn


« Reply #3 on: September 07, 2012, 07:29:04 PM »

good luck and rememberNOT to use too much suction.   In fact,  stop along the way and look down through the cut out shim to make sure you aren't killing the bees.

At least I think that is what Robo meant to say.

I was going to suggest using a "flat hoe" to scrap the comb off of the sides of the plywood.

I would not put an empty super on the bottom of the stack in the bee vac, they will not have any thing to crawl up onto, if you have to use an empty I would suggest on the top of the stack.

I think once you pull the plywood back there will be comb from stud to stud and hanging down a couple of feet. Rubber bands are quick and easy and can be put on horizontally as well as vertically.

If you are finding lots of runny nectar in the combs be extra careful not to suck it out of the combs, it will make the bees all sticky and they will die.
Logged

see my swarms and cut outs at https://www.youtube.com/user/soapy22bullet?feature=mhee

those hot bees will have you steppin and a fetchin like your heads on fire and your @ss is a catchin!!!

Bees will be bees and do as they please!
Robo
Technical
Administrator
Galactic Bee
*******
Offline Offline

Gender: Male
Posts: 6391


Location: Scenic Catskill Mountains - NY

Beekeep On!


WWW
« Reply #4 on: September 07, 2012, 07:45:30 PM »

Yes, sometimes my fingers can't kee up smiley
Logged

"Opportunity is missed by most people because it comes dressed in overalls and looks like work." - Thomas Edison


Intheswamp
Queen Bee
****
Offline Offline

Posts: 1377

Location: South Central Alabama - Zone 8A


WWW
« Reply #5 on: September 07, 2012, 09:09:28 PM »

Thanks for the feedback, guys.  I'm really hoping this works out good.  It seems late to be doing this removal, if something happens to the queen I don't know whether the colony can make itself a new queen and her get mated.  But, the guy has put a deadline on them so we're going to give it a good shot.

Robo, when you say you figure the comb will be parallel to the plywood do you mean the plane of each comb will be parallel with the plywood?  Looking at where the owner had removed the hive last year the wax pattern remaining on the plywood  shows that they were spanning the cavity from plywood to plywood (he didn't put the plywood back on) which would've made that comb at a 90-degree angle with the plywood.  I asked the owner if he remembered if the comb seemed to stick to one piece of plywood more so than the other...he said he didn't remember one being apparently favored for attachment but that comb stuck to both sides as they removed the one piece of plywood.  

What size are the holes for the vacuum hoses?  I measured my old Craftsman 5.5hp vac and the actual connector (has the thumb latch on the vacuum end) measured 2.25" o.d.  The hose itself "seemed" to measure 2.5" but this was just holding a tape measure up against it so not up to NASA standards. Smiley  I've got another shop vac that I bought at one of those give-away-sales at Lowe's a few years back that's been sitting in storage that I've gotta check the hose diameter on...I think it's about the same as the Craftsman.

G3, I had thought about using an empty super on bottom to give the bees a larger area to "arrive into".  I understand that when the bees arrive they leave the high-pressure area of the hose into a much more gentle atmosphere but I didn't want them bumping into frames hanging down.  Apparently, though, they do fine with the space furnished by the bottom board of the bee vac.  Losing the empty at the bottom will make more efficient use of the vac chamber and make it less bulky and more manageable...especially if I decide to go four supers tall.  I'll lose the bottom empty box.

I'm wondering, too, about how many supers I need for brood...do ya'll think two supers for brood will probably be enough?  8-frame medium supers, remember.   Of course this leads to checking my frame inventory, too.  

I'll be going the rubberband route...I'll be prepared to go vertically or horizontally.  G3, I hope you're right about the comb going from stud to stud, but that would be a very wide comb.   I believe these studs are roughly 8' apart.  The screws are only around the perimeter...none in the field.  Something tells me I'm probably going to work with a lot of narrow comb...I really hope I'm wrong!

Things that I have been  thinking over and over about....too much vac pressure, sucking up too much nectar/honey, and the bees overheating inside the bee-vac.   If I get things together in time I'm going to practice with some styrofoam peanuts before heading to the site.  

Oh yeah, the idea of the knife on a stick or the flat hoe is a good one...one or the other will go with us! Wink  

Thanks for the help, but I'm sure I'll have plenty more questions!
Ed

ETA:  I picked up on the pressure thing, I tend to complete a thought and drop words as I type, too.  It's a gift!  grin
Logged

www.beeweather.com 
American blood spilled to protect the freedom and peace of people all over the world.  320,000 USA casualties in WWI, 1,076,000 USA casualties in WWII, 128,000 USA casualties in the Korean War, 211,000 casualties in the Vietnam "conflict", 57,000 USA casualties in "War on Terror".  Benghazi, Libya, 13 USA casualties. These figures don't include 70,000 MIA.  But, the leaders of one political party of the United States of America continue to make the statement..."What difference does it make?".

"We can't expect the American People to jump from Capitalism to Communism, but we can assist their elected leaders in giving them small doses of Socialism, until they awaken one day to find that they have Communism."..."The press is our chief ideological weapon." - Nikita Khrushchev
BabcockFarms
House Bee
**
Offline Offline

Gender: Male
Posts: 168


Location: Spring Ranch, Nebraska


« Reply #6 on: September 07, 2012, 09:46:47 PM »

Enjoy this moment, a make a video or take lots of pictures and post for us to see the fun you will be having....
Logged

Ron Babcock

                                  "I believe the good that men do, will live long after they gone."
                                                                                                                          ~Mr. Fox Haas

<
G3farms
Queen Bee
****
Offline Offline

Gender: Male
Posts: 1485


Location: concord, tn


« Reply #7 on: September 07, 2012, 09:51:13 PM »

The hose itself is is about 2 1/2" but the hard plastic connectors are 2 1/4", I use a 2 1/4" hole saw and it is a snug fit, might even need to hit it a lick with some sand paper.

The comb can run in any direction and just might run in several directions, nothing is a given when it comes to bees............Rule #1 Bees are bees and do as they please!
Logged

see my swarms and cut outs at https://www.youtube.com/user/soapy22bullet?feature=mhee

those hot bees will have you steppin and a fetchin like your heads on fire and your @ss is a catchin!!!

Bees will be bees and do as they please!
Intheswamp
Queen Bee
****
Offline Offline

Posts: 1377

Location: South Central Alabama - Zone 8A


WWW
« Reply #8 on: September 07, 2012, 10:58:11 PM »

Ron, I don't know how to post photos.....just kiddin'. grin    I suspect that I will take a few. Wink

G3, thanks for the specs!  That works out great!  And thanks for posting Rule #1...I'd been trying to think of the wording of that for several days and it is so true! Smiley

Ed
Logged

www.beeweather.com 
American blood spilled to protect the freedom and peace of people all over the world.  320,000 USA casualties in WWI, 1,076,000 USA casualties in WWII, 128,000 USA casualties in the Korean War, 211,000 casualties in the Vietnam "conflict", 57,000 USA casualties in "War on Terror".  Benghazi, Libya, 13 USA casualties. These figures don't include 70,000 MIA.  But, the leaders of one political party of the United States of America continue to make the statement..."What difference does it make?".

"We can't expect the American People to jump from Capitalism to Communism, but we can assist their elected leaders in giving them small doses of Socialism, until they awaken one day to find that they have Communism."..."The press is our chief ideological weapon." - Nikita Khrushchev
JP
The Swarm King
Universal Bee
*******
Offline Offline

Gender: Male
Posts: 11668


Location: Metairie, Louisiana

I like doing cut-outs, but I love catching swarms!


WWW
« Reply #9 on: September 08, 2012, 12:05:07 AM »

Looking at the pics I'm wondering if perhaps you have more than one hive there.


...JP
Logged

"Good friends are as sweet as honey" Winne the Pooh

My pictures can be viewed at http://picasaweb.google.com/pyxicephalus
and
http://picasaweb.google.com/112138792165178452970

My Youtube videos can be viewed here: http://www.youtube.com/results?search_query=JPthebeeman&aq=f

My website JPthebeeman.com http://www.jpthebeeman.com/jpthebeeman/
Intheswamp
Queen Bee
****
Offline Offline

Posts: 1377

Location: South Central Alabama - Zone 8A


WWW
« Reply #10 on: September 08, 2012, 12:36:31 AM »

Looking at the pics I'm wondering if perhaps you have more than one hive there.


...JP
JP, that crossed my mind but other things tell me "no".  But, I'm a rookie. Wink

There is a strong "hive smell" when you get near the wall.  Those two big clumps of bees were definitely spread out.  It was warm that day and the afternoon sun was striking that side of the wall.  I figure the width of the cavity is about 4 inches so it would probably warm up pretty quickly. 

The bees to the left were just hanging out, there was a fair amount of traffic into and out of the quarter-sized entrance there. 

The larger cluster at the top center had no bees coming and going...they were simply clustered there. 

The small group of bees at the far right upper corner numbered maybe a few more than what is in the picture...looking into that first section of wall via a crack below these bees we were not able to see any comb from our vantage point (might find some, though)....these bees were fanning their striped rears off.  If there is no comb in that section then they were simply trying to cool the cavities down.  Must be passage between the two sections.

I'm planning for a single colony, but think I'll throw a couple of extra boxes onboard "in case".  The problem will be if I use the Robo-vac on one colony I'll have it full of bees....I guess I can let my mentor show me how to take them without a vac, eh? Smiley

My mentor has only seen the pictures that ya'll have seen.  He thinks we need to work from the opposite side...same set up with sheet metal screens and plywood.  That side would be a little better protected from rain and sun.  We're doing the removal on the 15th so that gives me a week to get my stuff together.

And JP, thank you and Schawee for the videos that ya'll have posted...they're a tremendous help to many beekeepers and even folks like me!   Thanks.  Wink

Ed
Logged

www.beeweather.com 
American blood spilled to protect the freedom and peace of people all over the world.  320,000 USA casualties in WWI, 1,076,000 USA casualties in WWII, 128,000 USA casualties in the Korean War, 211,000 casualties in the Vietnam "conflict", 57,000 USA casualties in "War on Terror".  Benghazi, Libya, 13 USA casualties. These figures don't include 70,000 MIA.  But, the leaders of one political party of the United States of America continue to make the statement..."What difference does it make?".

"We can't expect the American People to jump from Capitalism to Communism, but we can assist their elected leaders in giving them small doses of Socialism, until they awaken one day to find that they have Communism."..."The press is our chief ideological weapon." - Nikita Khrushchev
Robo
Technical
Administrator
Galactic Bee
*******
Offline Offline

Gender: Male
Posts: 6391


Location: Scenic Catskill Mountains - NY

Beekeep On!


WWW
« Reply #11 on: September 08, 2012, 07:27:04 AM »

Robo, when you say you figure the comb will be parallel to the plywood do you mean the plane of each comb will be parallel with the plywood?  Looking at where the owner had removed the hive last year the wax pattern remaining on the plywood  shows that they were spanning the cavity from plywood to plywood (he didn't put the plywood back on) which would've made that comb at a 90-degree angle with the plywood.  I asked the owner if he remembered if the comb seemed to stick to one piece of plywood more so than the other...he said he didn't remember one being apparently favored for attachment but that comb stuck to both sides as they removed the one piece of plywood.  

What size are the holes for the vacuum hoses?  I measured my old Craftsman 5.5hp vac and the actual connector (has the thumb latch on the vacuum end) measured 2.25" o.d.  The hose itself "seemed" to measure 2.5" but this was just holding a tape measure up against it so not up to NASA standards. Smiley  I've got another shop vac that I bought at one of those give-away-sales at Lowe's a few years back that's been sitting in storage that I've gotta check the hose diameter on...I think it's about the same as the Craftsman.

Yes, most times I find that they will draw the comb in the widest plane,  but off course when your dealing with bees,  nothing is a given.  The vac uses the standard 2.5" shop vac type hose.   I just emailed you the directions that will be with the vac, so you can read ahead of time.

Rob...
Logged

"Opportunity is missed by most people because it comes dressed in overalls and looks like work." - Thomas Edison


Intheswamp
Queen Bee
****
Offline Offline

Posts: 1377

Location: South Central Alabama - Zone 8A


WWW
« Reply #12 on: September 08, 2012, 11:19:57 AM »

That makes sense to me that the bees draw the comb in the dimension that gives them the largest comb.  I would think that with a tight fit three combs could hang in the cavity parallel to the plywood.  I refer back to Rule #1 (tnx G3!). Wink  We'll find out next Saturday!

I was wondering about something.  After the brood frames have been placed on top of the cut-out shim and the shim has begun to be withdrawn there will probably be stragglers gathering around the old comb area or onto the bee-vac itself.  Is it ok to run the vac some after the cut-out shim has been removed or in the process of being removed? 

I was thinking about ventilation.  When putting the brood box on top of the vac would installing a ventilated inner cover between the vac top and brood box be ok?  I was thinking that for the time following the cutout that the vac top could be removed and the ventilated inner cover could be strapped down as the top giving the bees plenty of ventilation...back at the bee yard just put a regular telescoping cover on top of this.  A day or so later when the vac bottom is replaced with a regular bottom board and the shim is removed a regular inner cover could be installed.  Worth the effort?  Was that explanation of my idea as clear as mud?  Undecided  Smiley

The long, narrow "crevice" nozzle appears to be the preferrred nozzle for bee vac'ing.   Are any other nozzles handy to have...maybe the small fan-shaped one for covering slightly wider swatches of comb area?  Or does the larger intake area require an increase in the pressure/velocity inside the hose that is too high for the bees' welfare?

Ed
Logged

www.beeweather.com 
American blood spilled to protect the freedom and peace of people all over the world.  320,000 USA casualties in WWI, 1,076,000 USA casualties in WWII, 128,000 USA casualties in the Korean War, 211,000 casualties in the Vietnam "conflict", 57,000 USA casualties in "War on Terror".  Benghazi, Libya, 13 USA casualties. These figures don't include 70,000 MIA.  But, the leaders of one political party of the United States of America continue to make the statement..."What difference does it make?".

"We can't expect the American People to jump from Capitalism to Communism, but we can assist their elected leaders in giving them small doses of Socialism, until they awaken one day to find that they have Communism."..."The press is our chief ideological weapon." - Nikita Khrushchev
Intheswamp
Queen Bee
****
Offline Offline

Posts: 1377

Location: South Central Alabama - Zone 8A


WWW
« Reply #13 on: September 08, 2012, 11:50:55 AM »

Somethings that I'm curious about in vacuuming a cluster like the large cluster of bees at the top of the wall.  I understand that the clusters are gently vacuumed just as bees on the combs are but... 

*When vacuuming a cluster like that do you start at the top surface towards the middle of the cluster or do you start around the perimeter of it? 

*Is there any problems to be aware of if a clump of bees breaks free and is sucked into the vac?  Clogged hose?   Would a clump being sucked up denote possibly too much vacuum?

*Would it be best to nudge them with the crevice tool or with the open, round end of the hose?

Probably some mundane questions, but figure the source.   grin

Thanks,
Ed
Logged

www.beeweather.com 
American blood spilled to protect the freedom and peace of people all over the world.  320,000 USA casualties in WWI, 1,076,000 USA casualties in WWII, 128,000 USA casualties in the Korean War, 211,000 casualties in the Vietnam "conflict", 57,000 USA casualties in "War on Terror".  Benghazi, Libya, 13 USA casualties. These figures don't include 70,000 MIA.  But, the leaders of one political party of the United States of America continue to make the statement..."What difference does it make?".

"We can't expect the American People to jump from Capitalism to Communism, but we can assist their elected leaders in giving them small doses of Socialism, until they awaken one day to find that they have Communism."..."The press is our chief ideological weapon." - Nikita Khrushchev
G3farms
Queen Bee
****
Offline Offline

Gender: Male
Posts: 1485


Location: concord, tn


« Reply #14 on: September 08, 2012, 04:43:05 PM »

The comb being build for the largest surface are makes great human sense but it has to have something to hang from. Sometimes the shortest distance makes more bee engineering sense. We will see.

The top of the bee vac has a ventilated top built into it, just remove the sliding top and PRESTO!!

The swarms or clusters of bees I have sucked up are mostly hanging on from the top and the rest of the bees are hanging on to each other. I like to just suck up a few at a time from the bottom and edges, if you start at the top and dislodge the ones that are hanging onto the structure there will be a big clump fall. Sucking up a big clump at one time can and will clog the hose, and they will pile up just inside of the bottom board preventing more bees from entering. Leave the vac running and give them a couple of minutes to move up into the frames of foundation or drawn comb.

I like to use the open end of the hose most of the time, crevice tool the other times, and even some homemade tools the rest of the time  Wink
Logged

see my swarms and cut outs at https://www.youtube.com/user/soapy22bullet?feature=mhee

those hot bees will have you steppin and a fetchin like your heads on fire and your @ss is a catchin!!!

Bees will be bees and do as they please!
Intheswamp
Queen Bee
****
Offline Offline

Posts: 1377

Location: South Central Alabama - Zone 8A


WWW
« Reply #15 on: September 08, 2012, 11:58:52 PM »

Thanks for the tips on vacuuming the clusters up, George, and for the info on the ventilated top.  I'm looking forward to the cut-out.  We'll find out which way the comb hangs next Saturday! Wink

Ed
Logged

www.beeweather.com 
American blood spilled to protect the freedom and peace of people all over the world.  320,000 USA casualties in WWI, 1,076,000 USA casualties in WWII, 128,000 USA casualties in the Korean War, 211,000 casualties in the Vietnam "conflict", 57,000 USA casualties in "War on Terror".  Benghazi, Libya, 13 USA casualties. These figures don't include 70,000 MIA.  But, the leaders of one political party of the United States of America continue to make the statement..."What difference does it make?".

"We can't expect the American People to jump from Capitalism to Communism, but we can assist their elected leaders in giving them small doses of Socialism, until they awaken one day to find that they have Communism."..."The press is our chief ideological weapon." - Nikita Khrushchev
Intheswamp
Queen Bee
****
Offline Offline

Posts: 1377

Location: South Central Alabama - Zone 8A


WWW
« Reply #16 on: September 15, 2012, 12:43:52 AM »

Trucks (mostly) loaded.  Gotta get some sleep.  Getting up in the morning and heading over to the dairy farm.

I have no idea if I've got what I need.  My mentor will probably look at all the stuff in the back of my truck look at me in dismay and say "You don't have a ____ in there."

"____" will be that very important thing that I'll probably forget...like my head.  rolleyes

Ed
Logged

www.beeweather.com 
American blood spilled to protect the freedom and peace of people all over the world.  320,000 USA casualties in WWI, 1,076,000 USA casualties in WWII, 128,000 USA casualties in the Korean War, 211,000 casualties in the Vietnam "conflict", 57,000 USA casualties in "War on Terror".  Benghazi, Libya, 13 USA casualties. These figures don't include 70,000 MIA.  But, the leaders of one political party of the United States of America continue to make the statement..."What difference does it make?".

"We can't expect the American People to jump from Capitalism to Communism, but we can assist their elected leaders in giving them small doses of Socialism, until they awaken one day to find that they have Communism."..."The press is our chief ideological weapon." - Nikita Khrushchev
BabcockFarms
House Bee
**
Offline Offline

Gender: Male
Posts: 168


Location: Spring Ranch, Nebraska


« Reply #17 on: September 15, 2012, 08:18:56 AM »

I sure no matter even if you forget something you can always fashion something out of duct tape and bailing wire.  grin

Good luck, and I'm looking forward to seeing pictures or even better video.
Logged

Ron Babcock

                                  "I believe the good that men do, will live long after they gone."
                                                                                                                          ~Mr. Fox Haas

<
Lazy W
House Bee
**
Offline Offline

Posts: 76

Location: McComb,MS


« Reply #18 on: September 15, 2012, 08:51:41 AM »

Good luck. Please let us know how it works out.
Logged
Intheswamp
Queen Bee
****
Offline Offline

Posts: 1377

Location: South Central Alabama - Zone 8A


WWW
« Reply #19 on: September 16, 2012, 09:58:46 AM »

I inquired about electricity the first time that I spoke with the owner it was one of those "of course we have electricity" answers.  This past week the owner apparently decided to have the power meter moved and one of his hunting club customers/buddies to do the re-wiring of a service box.  rolleyes   Anyhow, we didn't attempt the removal.  I probably should have persevered without electricity but I had studied up exactly ZERO on doing that.  My mentor has done vac-less bee removals before but we didn't even have a bee brush with us.  Well, spent lots of time getting gear together, truck loaded, getting there, unloading, hunting electricity plug to plug, phone calls, reloading, etc.,.  The guy doing the "electrical" work (some type of funky connection to his camper that seemed a bit non-standard to me) showed up.  After talking with him the "30 minutes" to get electricity that the owner had mentioned turned into at least "an hour" from the guy doing the "electrical work"...and this included burying the electrical wire in conduit.  We heard all of this and loaded the truck back up and left.  We were there three hours, plus equipment preparation, loading, unloading, reloading, and unloading again.  A rather aggravating trip.

I'm going to call the owner this afternoon and see about possibly salvaging the removal.  My problem is that he wants the bees gone by this coming Saturday...we're taking the granddaughters to the beach this weekend.  60-70 percent chance of rain is predicted for the first couple of days this week with Wednesday being the first clear day, but I really don't want to be in the itching stage from bee stings while out of the beach in the sun building sandcastles.

It was really a downer...basically killed the evening before detailing up my gear, finished loading early Saturday morning, got up there a little after 9am, piddled around unloading and assessing the situation, spent a substantial amount of time trying to find electricity (talk about a mess, I should've took pictures of that snarled wiring laying outside the pole barn), several phone calls to the owners voicemail, finally got in contact with him, then had to wait for him to get in touch with the "electrician", blah, blah, blah.  The owner didn't think we'd need electricity...duh, does he wonder why I inquired about electricity in the first place?  <sigh>

Maybe we can work something out on the bees.  He implied earlier that the bees had to go "one way or the other"...I'm pretty sure he was implying spraying them.  evil.  That's a good hive of bees...they were bringing in TONS of whiteish pollen...it impressed my mentor at the amount they were steadily bringing in.  Undecided

Ah well, we'll see what transpires this afternoon.

The failed bee remover...  Sad
Ed

PS...I hope the owner has good insurance because I was *not* impressed with the electrical work going on...helter skelter.
Logged

www.beeweather.com 
American blood spilled to protect the freedom and peace of people all over the world.  320,000 USA casualties in WWI, 1,076,000 USA casualties in WWII, 128,000 USA casualties in the Korean War, 211,000 casualties in the Vietnam "conflict", 57,000 USA casualties in "War on Terror".  Benghazi, Libya, 13 USA casualties. These figures don't include 70,000 MIA.  But, the leaders of one political party of the United States of America continue to make the statement..."What difference does it make?".

"We can't expect the American People to jump from Capitalism to Communism, but we can assist their elected leaders in giving them small doses of Socialism, until they awaken one day to find that they have Communism."..."The press is our chief ideological weapon." - Nikita Khrushchev
Lazy W
House Bee
**
Offline Offline

Posts: 76

Location: McComb,MS


« Reply #20 on: September 16, 2012, 12:21:47 PM »

That just plane SUX. I hope you can work it out. I have had to do aremoval  using a generator at an old abandon farm house. Of course I had a heads up that there was no service before I packed up the truck. Keep us posted.
Logged
Intheswamp
Queen Bee
****
Offline Offline

Posts: 1377

Location: South Central Alabama - Zone 8A


WWW
« Reply #21 on: September 16, 2012, 02:00:58 PM »

Yelp, I had the perfect generator for this...one of those little 1800watt hand-toteable Colemans.  It ran my 6hp old shop vac great.  It and an air compressor sprouted legs and ran away from home a couple of months ago...out of our open garage.  Would love to find out for sure "who" gave them a ride.  Jerry  whip

Ed
Logged

www.beeweather.com 
American blood spilled to protect the freedom and peace of people all over the world.  320,000 USA casualties in WWI, 1,076,000 USA casualties in WWII, 128,000 USA casualties in the Korean War, 211,000 casualties in the Vietnam "conflict", 57,000 USA casualties in "War on Terror".  Benghazi, Libya, 13 USA casualties. These figures don't include 70,000 MIA.  But, the leaders of one political party of the United States of America continue to make the statement..."What difference does it make?".

"We can't expect the American People to jump from Capitalism to Communism, but we can assist their elected leaders in giving them small doses of Socialism, until they awaken one day to find that they have Communism."..."The press is our chief ideological weapon." - Nikita Khrushchev
Lazy W
House Bee
**
Offline Offline

Posts: 76

Location: McComb,MS


« Reply #22 on: September 16, 2012, 10:06:54 PM »

That's two things I can not stand, A lair and a thief. I have no time for either one.
Logged
wildforager
New Bee
*
Offline Offline

Gender: Male
Posts: 33


Location: Sheboygan, WI


WWW
« Reply #23 on: September 17, 2012, 01:28:33 AM »

Good luck on removing those bees. Even though your visit was a bust at least they're not yellow jackets! Good you assessed the situation first.
Logged

A weed is just a plant in the wrong place. -Luther Burbank

To find out more about me check out my website.... www.broomsbylittlejohn.com
Intheswamp
Queen Bee
****
Offline Offline

Posts: 1377

Location: South Central Alabama - Zone 8A


WWW
« Reply #24 on: September 17, 2012, 09:09:07 AM »

Lazy, I agree with you...the way I look at it a liar steals the truth from you.  I don't think the owner intentionally lied about the electricity...I think he just didn't think, which still doesn't help the situation.

This was a wasted trip, wildforager,  The on site assessment was made the previous week.   Undecided

Ed

Logged

www.beeweather.com 
American blood spilled to protect the freedom and peace of people all over the world.  320,000 USA casualties in WWI, 1,076,000 USA casualties in WWII, 128,000 USA casualties in the Korean War, 211,000 casualties in the Vietnam "conflict", 57,000 USA casualties in "War on Terror".  Benghazi, Libya, 13 USA casualties. These figures don't include 70,000 MIA.  But, the leaders of one political party of the United States of America continue to make the statement..."What difference does it make?".

"We can't expect the American People to jump from Capitalism to Communism, but we can assist their elected leaders in giving them small doses of Socialism, until they awaken one day to find that they have Communism."..."The press is our chief ideological weapon." - Nikita Khrushchev
Intheswamp
Queen Bee
****
Offline Offline

Posts: 1377

Location: South Central Alabama - Zone 8A


WWW
« Reply #25 on: September 19, 2012, 07:51:06 AM »

We're going to try it again this morning.

Ed
Logged

www.beeweather.com 
American blood spilled to protect the freedom and peace of people all over the world.  320,000 USA casualties in WWI, 1,076,000 USA casualties in WWII, 128,000 USA casualties in the Korean War, 211,000 casualties in the Vietnam "conflict", 57,000 USA casualties in "War on Terror".  Benghazi, Libya, 13 USA casualties. These figures don't include 70,000 MIA.  But, the leaders of one political party of the United States of America continue to make the statement..."What difference does it make?".

"We can't expect the American People to jump from Capitalism to Communism, but we can assist their elected leaders in giving them small doses of Socialism, until they awaken one day to find that they have Communism."..."The press is our chief ideological weapon." - Nikita Khrushchev
BabcockFarms
House Bee
**
Offline Offline

Gender: Male
Posts: 168


Location: Spring Ranch, Nebraska


« Reply #26 on: September 19, 2012, 08:11:24 PM »

Well?
Logged

Ron Babcock

                                  "I believe the good that men do, will live long after they gone."
                                                                                                                          ~Mr. Fox Haas

<
Lazy W
House Bee
**
Offline Offline

Posts: 76

Location: McComb,MS


« Reply #27 on: September 19, 2012, 10:07:50 PM »

How did it go? Don't keep us hanging.
Logged
wildforager
New Bee
*
Offline Offline

Gender: Male
Posts: 33


Location: Sheboygan, WI


WWW
« Reply #28 on: September 19, 2012, 10:58:31 PM »

Maybe he's busy pulling stingers out of his suit. grin He'll let us know any minute.... tumbleweed
Logged

A weed is just a plant in the wrong place. -Luther Burbank

To find out more about me check out my website.... www.broomsbylittlejohn.com
Intheswamp
Queen Bee
****
Offline Offline

Posts: 1377

Location: South Central Alabama - Zone 8A


WWW
« Reply #29 on: September 23, 2012, 09:43:00 PM »

A very quick note....  We got them.  VERY gentle bees.  I'll give details later.  Rough story, not with the bees, though...
Logged

www.beeweather.com 
American blood spilled to protect the freedom and peace of people all over the world.  320,000 USA casualties in WWI, 1,076,000 USA casualties in WWII, 128,000 USA casualties in the Korean War, 211,000 casualties in the Vietnam "conflict", 57,000 USA casualties in "War on Terror".  Benghazi, Libya, 13 USA casualties. These figures don't include 70,000 MIA.  But, the leaders of one political party of the United States of America continue to make the statement..."What difference does it make?".

"We can't expect the American People to jump from Capitalism to Communism, but we can assist their elected leaders in giving them small doses of Socialism, until they awaken one day to find that they have Communism."..."The press is our chief ideological weapon." - Nikita Khrushchev
Intheswamp
Queen Bee
****
Offline Offline

Posts: 1377

Location: South Central Alabama - Zone 8A


WWW
« Reply #30 on: September 26, 2012, 03:17:10 PM »

Ok, here's finally a short report on the bee removal....

We started about 9:30am last Wednesday morning.  Thankfully we had electricity and the sheet of plywood came off the metal studs without a problem.  We sat the plywood down and spun it around so the inside would face out. 

On the near end of the plywood you can see comb that was being built adjoining the rest of the comb structure.  We chose the correct side to remove as very little comb was fastened to this piece of plywood. 

That is Mr. Nolen, my mentor, taking some pictures with his phone.  Using my cheap Harbor Freight temperature gun we petty closely located where the colony was inside the cavity...on the cool morning the temperature difference between bees and no-bees areas on the plywood was around 5 degrees.  Of interest is that there were several small hive beetles in the cavity.  Naturally there were some within the comb area but what was really interesting was probably 30 or 40 of them at the lower, center edge of the plywood grouped together in a circle...there were a number of bees down there that apparently had them corralled. 


Here is a closer shot of the colony.  One of the combs fell as we were removing the sheet of plywood.  These bees are very calm and gentle.


Mr. Nolen cutting out a comb...


Like I said, these bees are very gentle.  We smoked the entrance (a 1" hole) lightly to begin with and after that the smoker only sat on the floor several feet away for the rest of the removal...it had gone out by the time we finished.  Mr. Nolen wore his inspector's jacket and I wore a white t-shirt and cloth hat w/veil.  I got a few stings but the trade off with being cool was worth it.  Before we removed the plywood Mr. Nolen was standing in the beeline of the incoming pollen laden bees...they didn't bother stinging but rather built up a significant number behind him as they waited to get to their entrance...they were bringing in lots of whitish pollen and I saw a few with some pink.

Here is Mr. Nolen examining some comb...we started out looking for the queen.  The bee-vac was something new for him to work with, he'd done many removals in the past with a bee brush and stated when we were through that the bee-vac is the way to go. Wink 


Mr. Nolen was a little bashful with the vac, which was probably a good thing.  We only had one major blockage in the hose and I think a large festooning clump of bees did that.  We worked through that and eventually he acquired a good speed with the vac.  The whole time we were looking for the queen.


So, Mr. Nolen vacuumed and cut loose comb, I detail vac'd some and cut and rubber-banded brood comb into frames.  Something else that was interesting is that there were plenty of drones and drone brood along with regular worker brood.  So, midway through September and still producing drones.

Here's a shot of a frame of brood I rubber banded.  I managed to get seven medium frames of open and capped brood.


We had removed all the large pieces of comb and the only thing left was honey comb in the channel of the metal frame work running across the top.  I worked myself down it, peering into it and digging a little honey comb out.  Finally I spotted her and got her in a queen catcher...it was nothing but clean-up then. Smiley  Nice, healthy leather colored lady.  Sorry, I didn't get a shot of the queen but I might be a able to dig one up from another guy's camera that dropped in off and on. 

This is a shot of the bees moving up after we removed the combining screen.


And finally, this is a shot (either that evening or the next morning) after the hive has been carried home and the bees are trying to figure out just what type of tornado that was that transported them to this unfamiliar area.  I set the hive/trap on a pair of concrete blocks positioned behind the leveled ones that were to be the permanent stand...this way I only had to move them forward a couple of feet to there final position.


Here is where the story gets rough...

That evening as I'm putting things away, straightening up, checking on the bees, etc., my back starts to hurt.  I figure I've done messed up in moving the four supers and equipment by myself...loading and unloading.  Things go downhill from there...stomach virus with a capital V.  Lips Sealed  I will spare the graphic details, but the next 24 hours I was in bed, couldn't hardly walk the next day.  I did manage Friday to put the brood box down on it's permanent bottom board and stand and set the supers on top with a cover and 1/2 gallon of syrup.  But, Friday night was another bad night.  Now today, a week later, I still feel flushed, aching, and completely zapped....I don't think I felt that bad when I cartwheeled a 300zx down through a river bottom back in the mid-80's and laid there all night before being found.  What is this bull going around?

And that, my friends, is why there was a delay in reporting.  Oh, I forgot to mention there was even a trip to the beach in the middle (the Friday night part was in Destin...oh boy!!!).<sigh>  But we had a good time Saturday and Sunday (and I felt good).   

Anyhow, I survived and the bees appear to be surviving.  They're working on the second 1/2 gallon of syrup but we also have a goldenrod flow on so they're getting something there, too.

I know I forgot stuff, but that's it in a nutshell.  I got a call today about bees in a lady's soffit and attic.  I told her I would come look at it this afternoon, but truthfully...I'm really not up to dealing with it.  We'll see...

Ed
Logged

www.beeweather.com 
American blood spilled to protect the freedom and peace of people all over the world.  320,000 USA casualties in WWI, 1,076,000 USA casualties in WWII, 128,000 USA casualties in the Korean War, 211,000 casualties in the Vietnam "conflict", 57,000 USA casualties in "War on Terror".  Benghazi, Libya, 13 USA casualties. These figures don't include 70,000 MIA.  But, the leaders of one political party of the United States of America continue to make the statement..."What difference does it make?".

"We can't expect the American People to jump from Capitalism to Communism, but we can assist their elected leaders in giving them small doses of Socialism, until they awaken one day to find that they have Communism."..."The press is our chief ideological weapon." - Nikita Khrushchev
BabcockFarms
House Bee
**
Offline Offline

Gender: Male
Posts: 168


Location: Spring Ranch, Nebraska


« Reply #31 on: September 26, 2012, 05:21:40 PM »

Great story, except for the last part.

Thanks for sharing your adventure with all of us?
Logged

Ron Babcock

                                  "I believe the good that men do, will live long after they gone."
                                                                                                                          ~Mr. Fox Haas

<
G3farms
Queen Bee
****
Offline Offline

Gender: Male
Posts: 1485


Location: concord, tn


« Reply #32 on: September 26, 2012, 10:38:20 PM »

Looks like you did a great job of getting them out!!

I did notice you cut the long combs into short pieces and kept the orientation going in the right direction  applause applause some would have taken the short cut and laid them in there longways.

.......and you even taught an old dog a new trick.......how to use a bee vac!!

Well those ladies had us all fooled and turned their comb on a 45, as rule one says "Bees are bees and do as they please".
Logged

see my swarms and cut outs at https://www.youtube.com/user/soapy22bullet?feature=mhee

those hot bees will have you steppin and a fetchin like your heads on fire and your @ss is a catchin!!!

Bees will be bees and do as they please!
Lazy W
House Bee
**
Offline Offline

Posts: 76

Location: McComb,MS


« Reply #33 on: September 27, 2012, 07:45:55 AM »

Great job. Glad you were able to catch the queen. That should keep them on track. great story. I enjoyed reading about your adventure. Glad you were not sick during the removal. Bee stings and stomach trouble could be to much in one day. Thanks for sharing.
Logged
Intheswamp
Queen Bee
****
Offline Offline

Posts: 1377

Location: South Central Alabama - Zone 8A


WWW
« Reply #34 on: September 27, 2012, 09:51:37 AM »

Thanks for the comments, ya'll.

George, it would've been tempting to lay the comb in sideways but...that just wasn't right! Wink  I'm not sure how much brood I ended up saving.  huh  The next day there was a pile of larvae that the bees had cleaned out of the hive.  During the removal I kept the box I was putting brood comb in in the shade...temps were >mid-80's...max time from first cut comb to recombining was four hours.  I'm wondering if the trip home chilled them.  I was afraid of overheating the bees so traveled with only the screen cover of the bee-vac covering the bees....naturally the brood box was on top....the box was positioned against the cab of the pickup truck with the trap's top about a foot below the truck's roofline...Huh?  There were lots of wax shavings in the bottom of the bee-vac and lots more has shown up in the oil tray.   I watched a bee or two fly off with some larvae.  When I put the comb in the frames I would mash the top edge of the comb into the frame/wedge area...I know this killed some larvae....I'm not sure if that was the right way to do it or not...maybe I should have cut the comb a bit shorter and not have worried about a snug fit up top?

Yelp, Mr. Nolen was tickled using the bee-vac, at first he wanted to suck'em out of the air from four feet away  grin but he caught on fast to the idea of it all.  He already mentioned that he might need to "borrow" it sometime. Wink 

I kind of felt the comb would be spanning from plywood to plywood, especially after looking at where the owner had removed a hive from last year.  Thankfully we removed the side that little comb was attached to....if we had removed the opposite side that more comb was attached to it would have been a lot more work and most likely torn up more comb...as it is we had one piece of comb fall when we removed the plywood.  Something else to note, but whether it will be a consistent thing or not is questionable, is that the length of the comb was attached more to the "cool" side.  The side we removed faces west and catches the afternoon sun...the opposite (east) side that they attached to more only catches a little morning sun and has a shade (semi-roof) over it and is thus cooler most of the time.  I don't know if the cooler temperature is more attractive to them or not....just something I noticed.

Another thing I got out of the removal is permission to put swarm traps out on the property.  It is a hunting club with two mobile homes onsite and a camper trailer more or less permanently set up.  I know one day I'm gonna get the "there's bees under my trailer" call....I'll deal with that when the day comes. Wink

Lazy, it was kind of confusing when I started getting sick.  I wasn't sure that it *wasn't* a delayed reaction to the bee stings.  I kept going over the symptoms of anaphylactic shock...some symptoms were there some were not, I even felt like my breathing got labored for a while, in the end I wrote it off and settled in for the "Siege of the Evil Virus".<groan>  To be honest, I didn't feel 100% during the removal.  Looking back on the removal I took very, very few pictures (for me)...I think I was off my game...I didn't even take a picture of the queen.  I was getting sick but just didn't know it.

Anyhow, now if I can get them through the winter.  At least I'm down here in south Alabama where the winter's aren't too harsh.  I'm looking at another possible removal.  I'm not so sure about this one...in a residence above a bay window but inside the attic I'm pretty sure.  I'm going back to look up in the attic in a day or so.  That seems like it would be a bad spot to cut comb from...tight quarters between the angle of roof rafters and ceiling joists.  We'll find out.  Currently still trying to get my strength back I'm not chomping at the bits to spend a half day in a hot attic.  Lips Sealed  Smiley

Ed
Logged

www.beeweather.com 
American blood spilled to protect the freedom and peace of people all over the world.  320,000 USA casualties in WWI, 1,076,000 USA casualties in WWII, 128,000 USA casualties in the Korean War, 211,000 casualties in the Vietnam "conflict", 57,000 USA casualties in "War on Terror".  Benghazi, Libya, 13 USA casualties. These figures don't include 70,000 MIA.  But, the leaders of one political party of the United States of America continue to make the statement..."What difference does it make?".

"We can't expect the American People to jump from Capitalism to Communism, but we can assist their elected leaders in giving them small doses of Socialism, until they awaken one day to find that they have Communism."..."The press is our chief ideological weapon." - Nikita Khrushchev
Intheswamp
Queen Bee
****
Offline Offline

Posts: 1377

Location: South Central Alabama - Zone 8A


WWW
« Reply #35 on: September 28, 2012, 10:24:00 AM »

I guess as time goes by the fog clears from my head...

One thing I failed to mention was that the colony had very little honey stored.  Along the comb attachment points in the channel iron there was a little honey and a few patches of uncapped nectar/honey.  They were packing in the pollen, though, so maybe they had a plan.   I'm not so sure they would have had enough resources to have made it through the winter, though.  But, the goldenrod has just now really got into a good flow.  In the first couple of pictures of the colony the comb that is not covered by bees is simply empty comb.

Ed
Logged

www.beeweather.com 
American blood spilled to protect the freedom and peace of people all over the world.  320,000 USA casualties in WWI, 1,076,000 USA casualties in WWII, 128,000 USA casualties in the Korean War, 211,000 casualties in the Vietnam "conflict", 57,000 USA casualties in "War on Terror".  Benghazi, Libya, 13 USA casualties. These figures don't include 70,000 MIA.  But, the leaders of one political party of the United States of America continue to make the statement..."What difference does it make?".

"We can't expect the American People to jump from Capitalism to Communism, but we can assist their elected leaders in giving them small doses of Socialism, until they awaken one day to find that they have Communism."..."The press is our chief ideological weapon." - Nikita Khrushchev
wildforager
New Bee
*
Offline Offline

Gender: Male
Posts: 33


Location: Sheboygan, WI


WWW
« Reply #36 on: September 29, 2012, 12:48:14 PM »

Wow great pictures! Thanks for sharing the story. That bushkill bee vac is a great design. I have one too and it has never let me down.

Hope you get over that stomach bug!
Logged

A weed is just a plant in the wrong place. -Luther Burbank

To find out more about me check out my website.... www.broomsbylittlejohn.com
Intheswamp
Queen Bee
****
Offline Offline

Posts: 1377

Location: South Central Alabama - Zone 8A


WWW
« Reply #37 on: March 08, 2014, 01:12:37 AM »

Just as a follow-up...this colony was the only one that made me honey in 2013...right at 110 pounds of honey in 2013...I guess after we found them with so few stores they decided to make up for it the next year!  Wink

Now, if I can just get two or three colonies doing that!!!  grin

Ed
Logged

www.beeweather.com 
American blood spilled to protect the freedom and peace of people all over the world.  320,000 USA casualties in WWI, 1,076,000 USA casualties in WWII, 128,000 USA casualties in the Korean War, 211,000 casualties in the Vietnam "conflict", 57,000 USA casualties in "War on Terror".  Benghazi, Libya, 13 USA casualties. These figures don't include 70,000 MIA.  But, the leaders of one political party of the United States of America continue to make the statement..."What difference does it make?".

"We can't expect the American People to jump from Capitalism to Communism, but we can assist their elected leaders in giving them small doses of Socialism, until they awaken one day to find that they have Communism."..."The press is our chief ideological weapon." - Nikita Khrushchev
Pages: 1 2 [All]   Go Up
  Print  
 
Jump to:  

Beemaster's Beekeeping Ring
Previous | Home | Join | Random | Next
Powered by MySQL Powered by PHP Powered by SMF 1.1.19 | SMF © 2013, Simple Machines | Sitemap Valid XHTML 1.0! Valid CSS!
Page created in 0.769 seconds with 22 queries.

Google visited last this page July 28, 2014, 02:20:06 AM