Welcome, Guest

Author Topic: Removal Technology  (Read 1108 times)

Offline KONASDAD

  • Super Bee
  • *****
  • Posts: 2011
  • Gender: Male
Removal Technology
« on: May 10, 2008, 04:30:33 PM »
I recently crossed paths w/ a man who does removals exclusively for a living. I turned down a removal because it was too high for me. The homeowner called me back to say this man was coming by to do the removal, would I care to watch. So off I went. I am glad I turned down job too.
The bees had an entrance about 25ft above ground between shingles, corner of window and soffit. This man put a fiberoptic camera inside hole and determined bees were about 20 ft above entrance. He then confirmed this w/ infrared scope. He found bees easily, then vacuumed them out and removed comb and was done in about 45 minutes. I never would have found these bees, and the homowner had a much smaller hole to deal w/. Man charged $1200. He doesn't do removals for less then $750, so he took my number so I could do easier cutouts that didn't demand his high tech approach. I was totally amazed. I am also trying to buy some of his older used equipment that was made obsolete by his hi-tech gizmos.
"The more complex the Mind, the Greater the need for the simplicity of Play".

Offline JP

  • The Swarm King
  • Universal Bee
  • *******
  • Posts: 11701
  • Gender: Male
  • I like doing cut-outs, but I love catching swarms!
    • JPthebeeman.com
Re: Removal Technology
« Reply #1 on: May 10, 2008, 04:44:49 PM »
"infrared scope" may be a borescope. Infrared imagery utilizes heat images such as an infrared imager does. I've looked into using infared imagery and what I would need to do the job, would run in the 30-40k range. Heat thermometer gun works well when temps are below say 85f. After that you need a borescope or a high dollar camera to "see" with.

The first rule in any removal process is locating EXACTLY where the hive is located.


...JP
"Good friends are as sweet as honey" Winne the Pooh

My pictures can be viewed at http://picasaweb.google.com/pyxicephalus
and
http://picasaweb.google.com/112138792165178452970

My Youtube user name is JPthebeeman
 My website JPthebeeman.com http://www.jpthebeeman.com/jpthebeeman/

Offline KONASDAD

  • Super Bee
  • *****
  • Posts: 2011
  • Gender: Male
Re: Removal Technology
« Reply #2 on: May 10, 2008, 06:37:31 PM »
"
The first rule in any removal process is locating EXACTLY where the hive is located.


...JP

They werent even close to where I would have expected them to be. They had plenty of room right above window, 7-10" from entrance. Instead they went up a seam and into third floor wall.
"The more complex the Mind, the Greater the need for the simplicity of Play".

Offline Cindi

  • Galactic Bee
  • ******
  • Posts: 9825
  • Gender: Female
Re: Removal Technology
« Reply #3 on: May 11, 2008, 11:08:09 AM »
Konasdad, yep, lucky you didn't take that cut out job, hee, hee.  The bees are very deceptive about where they are located it sounds like.  Keep to the more simple ones for sure.  Have that beautiful and most wonderful day, Cindi
There are strange things done in the midnight sun by the men who moil for gold.  The Arctic trails have their secret tales that would make your blood run cold.  The Northern Lights have seen queer sights, but the queerest they ever did see, what the night on the marge of Lake Lebarge, I cremated Sam McGee.  Robert Service

 

anything