Need Bees Removed?
International
Beekeeping Forums
July 23, 2014, 12:48:01 AM *
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
News: 24/7 Ventrilo Voice chat -click for instructions and free software here
 
   Home   Help Search Calendar bee removal Login Register Chat  

Pages: [1]   Go Down
  Print  
Author Topic: support pins  (Read 1476 times)
Gomez Adams
New Bee
*
Offline Offline

Posts: 1

Location: Athens, Alabama


« on: October 29, 2004, 09:51:04 PM »

I'm just getting started in bee keeping and have a couple of questions...
Are support pins needed in frames when you use foundation that has wire embeded in it?  Also how often should you replace and/or change out the frames in the broode chamber?  I've read that the cells get smaller with time and continued use.   huh
Logged

another day in Paradise
Anonymous
Guest
« Reply #1 on: October 29, 2004, 11:18:32 PM »

If you have horizontilly wired frames, and the foundation is crimp wired, you don't need the pins   I personally prefer the wired frames and crimp wired foundation, unless I had it in mind to make cut comb honey.

As far as culling brood comb, there are several different opinions about that.  I feel drawn comb is our most valuable asset, and I am hesitant to discard it under most circumstances.  Others think that it helps with disease control by rotating it out.  I've seen alot of 20 year old comb still in service, in perfectly healthy colonys.  As far as the diameter of the cells becoming smaller over time, this is a good thing.  Many beekeepers, the Lusbys for example, are claiming small cell to be the first line of defense against the mites.  I believe them, and am setting up to regress my colonies this spring.  I imagine if the cell diameter actually became a problem for the bees, they would chew it out to the size they wanted it.  They are pretty good about doing what they need to most of the time, as you will discover.

Finally, enjoy your bees.  They are fascinating creatures that can take over YOUR life if you let them.
Logged
Anonymous
Guest
« Reply #2 on: October 29, 2004, 11:53:26 PM »

If your foundation has vertical crimped wires (small wavy wires) and horizontal wires I agree that you don't need the pins. If however, you only have the vertical wires I would recommend you put 2 pins on either end of the foundation. This is true of both foundation for brood areas, or foundation for the honey supers.
In the brood area, if the foundation isn't supported by either horizontal wires or support pins at the ends it can have the tendency to warp from the heat in the brood box or the weight on it.
In the supers it'e a good idea to either wire the foundation with horizontal wires or support it on the ends with support pins due to the forces created in your extractor when you exract the honey from the frames.
As far as replacing old comb, I normally only replace comb that has too many drones cells on it or is so old that it is extremely brittle and difficult to handle without worrying whether or not it's going to break from normal handling.
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Beemaster's Beekeeping Ring
Previous | Home | Join | Random | Next
Powered by MySQL Powered by PHP Powered by SMF 1.1.19 | SMF © 2013, Simple Machines | Sitemap Valid XHTML 1.0! Valid CSS!
Page created in 0.087 seconds with 21 queries.

Google visited last this page July 09, 2014, 01:50:01 PM