Welcome, Guest

Author Topic: Screened Bottom Board Wire size ?  (Read 1646 times)

Offline Bee-Bop

  • Field Bee
  • ***
  • Posts: 689
  • Gender: Male
Screened Bottom Board Wire size ?
« on: January 03, 2008, 01:42:20 PM »
I am building a few Screened bottom boards, with 3/4 in. pans underneith to hold mineral oil, all information I believe I have found says " use # 8 hardware cloth "
I understand a adult small hive bettle is too large fit thru # 8 wire cloth, would
not # 7 hardware cloth work just as well ?
If i am correct, bees cannot pass thru # 7 but small hive bettles can.

Any comments will be appreciated.

Oh one other thing. Why isn't plain aluminum window screen mentioned for thing like bee robber screens, vent covers, etc . Just wondering

Thanks
Bee-Bop
" If Your not part of the genetic solution of breeding mite-free bees, then You're part of the problem "

Offline pdmattox

  • Queen Bee
  • ****
  • Posts: 1131
  • Gender: Male
    • October bend Rv Park
Re: Screened Bottom Board Wire size ?
« Reply #1 on: January 03, 2008, 08:47:54 PM »
Sounds like the #7 will work and so would the window screen. I use it to block entrances sometimes.

Offline BenC

  • House Bee
  • **
  • Posts: 155
  • Gender: Male
Re: Screened Bottom Board Wire size ?
« Reply #2 on: January 03, 2008, 08:57:25 PM »
I've used plain aluminum screen before and it works, but I would not recommend it because one knock and it's pretty much shot.  Galv hardware cloth is much more durable and won't unravel.  I can clean hardware cloth of propolis and other junk by scraping it with a hive tool but don't see that working to well with window screen.  #8 won't get plugged with debris as easily/quickly.  For those who do varroa counts, #8 harware cloth would allow the mites to fall through and be caught for collection.  THE reasoning behind #8 beeing the standard?  I don't know.  I just use it because for me it works best. 

Offline Michael Bush

  • Universal Bee
  • *******
  • Posts: 14433
  • Gender: Male
    • bushfarms.com
Re: Screened Bottom Board Wire size ?
« Reply #3 on: January 03, 2008, 10:28:30 PM »
Bees cannot get through #7 if the wires are straight.  If they are bent they can.
Michael Bush
My website:  bushfarms.com/bees.htm en espanol: bushfarms.com/es_bees.htm
My book:  ThePracticalBeekeeper.com
-------------------
"Everything works if you let it."--Rick Nielsen