Welcome, Guest

Author Topic: Honey Heater?  (Read 3914 times)

Offline beesharp

  • House Bee
  • **
  • Posts: 52
    • http://sharptelco.com
Honey Heater?
« on: September 08, 2004, 08:03:11 AM »
I'm building a honey heater to lre-iquify 60llb pails of honey
and need some help. The insulated box is easy and almost
complete. I plan on using a light bulb as a heat source and
a small fan to move the air around in the box.

The challenge I'm having is trying to locate a thermostat
to turn the the light off at a known temperature. I haven't
had any success finding a thermostat locally. I did find a
couple "single-pole, single-throw" thermostats on the web
that look encouraging. I'm curious if anyone else has
"been there, done that" and can provide some guidance.
TIA
Jim

Offline lobstafari

  • House Bee
  • **
  • Posts: 71
Honey Heater?
« Reply #1 on: September 08, 2004, 06:40:00 PM »
I did something similar to that once, with a digital programmable thermostat from Home Depot........okok, I ripped it off our wall, then replaced it when I was done, but originally got it at HD.  Good luck

Anonymous

  • Guest
Honey Heater?
« Reply #2 on: November 10, 2004, 12:36:08 AM »
Beesharp,
Sorry but somehow I missed this post of yours. If you haven't figured it out by now a simple wall type thermostat for controlling a home furnace works just fine. They typically operate on 24 volts but are capable of operating on 120 volts. The current draw from a 100 watt lightbulb is less than 1 amp and I can't imagine your using anything more than a simple computer type fan for circulation. My freezer works fine with one 100 watt bulb (with no fan). I keep it at 90 degrees in order to heat up buckets of honey before I filter and bottle it.
Once you have the system operating it's a simple matter of placing a thermometer inside to check on the accuracy of the thermostat. If it's off a little, all you need do is ignore it and go by the reading on the thermometer.
You can buy a simple one from any hardware store for around $10.

 

anything